Following is information on our Cat D9T, s/n REX00666, that we recently acquired. The machine went into service in 2019 and is equipped with EROPS, a/c, stockpile arrangement, dual tilt and carrier rollers, 9SU dozer and single shank ripper. This unit was used in a wood chip application so it’s never been in rock and had an easy life since new. While we don’t have an exact undercarriage measurement, there is a considerable amount of serviceable life remaining.
 
The machine currently has 25,640 total hours with a significant amount of that being idle time. Also of importance to note, this machine had the engine rebuilt at 13,497 hours and then the balance of the powertrain was done at 14,803 hours. Historically, machines from this type of application have a utilization rate of 50% or less which we believe to be the case with this unit as well.
 
Since it’s been at our facility we have repaired numerous items with the most significant being installing a new turbo, resealing hydraulic cylinders and other miscellaneous leaks, resealing engine oil pan, installing rod and main bearings and resealing transmission input seal.
 
The machine will be ready to work when it arrives at the jobsite.